TS3A5017PWR

9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A5017PWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 479
Description: 9.5ns, 3.5ns SP4T 12Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	12Ohm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Base Part Number	TS3A5017
Pin Count	16
Number of Outputs	8
Polarity	Non-Inverting
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	2.3V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	7μA
Throw Configuration	4PST
Propagation Delay	9.5 ns
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	165MHz
Turn-Off Delay Time	4.5 ns
On-State Resistance (Max)	12Ohm
High Level Output Current	128mA
Low Level Output Current	128mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	48 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 19pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	9.5ns, 3.5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-49dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	10ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Drain to Source Resistance	12Ohm
Normal Position	NC
Signal Current-Max	0.1A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A5017PWR Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with TS3A5017 if you are looking for variants. This digital multiplexer has 12Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. There should be 2.3V voltage fed to the electrical part below 2.3V. It would be sufficient to run this analogue multiplexer with 2.5μA current. An analogue multiplexer drains from a single voltage supply at 2.3V~3.6V. Putting voltage greater than 7μA on the multiplexer may cause damage. It is possible to transfer data over a 165MHz-bandwidth. The Drain to Source resistance of this electronic component is 12Ohm. Multiplexer ics with 8 outputs are available.