TS3A5017RGYRG4

9.5ns, 3.5ns SP4T 12Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-VFQFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A5017RGYRG4
Package: 16-VFQFN Exposed Pad
Datasheet: -
Stock: 972
Description: 9.5ns, 3.5ns SP4T 12Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Weight	37.194574mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
Resistance	12Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	TS3A5017
Pin Count	16
Number of Outputs	8
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	2.3V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	7μA
Propagation Delay	9.5 ns
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	165MHz
Turn-Off Delay Time	4.5 ns
On-State Resistance (Max)	12Ohm
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	48 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 19pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	9.5ns, 3.5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-49dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	10ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Normal Position	NC
Signal Current-Max	0.1A
Height	1mm
Length	4mm
Width	3.5mm
Thickness	900μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A5017RGYRG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-VFQFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SP4T switching circuits. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with TS3A5017. The internal resistance of this digital multiplexer is 12Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 3.6V in normal situations. Single supply type digital switch with a low cost. 2.3V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 2.5μA current would be sufficient. This analogue multiplexer requires a voltage of 2.3V~3.6V when it drains from a single voltage supply. Putting voltage greater than 7μA on the multiplexer may cause damage. The transfer of data can be performed over 165MHz bandwidths. Multiplexer ics with 8 outputs are available.