TS3A5017RSVR

9.5ns, 3.5ns SP4T 12Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-UFQFN

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3A5017RSVR
Package: 16-UFQFN
Datasheet: -
Stock: 567
Description: 9.5ns, 3.5ns SP4T 12Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A5017 16 Pins 100nA 2.5V 16-UFQFN(Kg)

Details

Tags

Parameters
Min Supply Voltage	2.3V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	7μA
Propagation Delay	9.5 ns
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	165MHz
Turn-Off Delay Time	4.5 ns
On-State Resistance (Max)	12Ohm
High Level Output Current	128mA
Low Level Output Current	128mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	48 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 19pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	9.5ns, 3.5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-49dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	10ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Normal Position	NC
Signal Current-Max	0.1A
Height	550μm
Length	2.6mm
Width	1.8mm
Thickness	500μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-UFQFN
Number of Pins	16
Weight	40.908362mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	12Ohm
Subcategory	Multiplexer or Switches
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Base Part Number	TS3A5017
Pin Count	16
Number of Outputs	8
Polarity	Non-Inverting
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	3.6V

TS3A5017RSVR Overview

Shipping overseas is convenient due to the electrical component's packing in 16-UFQFN. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. It is part of the design of the 16 series that this electronic component is included. Multiplexers built on a SP4T switching circuit are built. A total of 2 circuits make up this switch device. Use TS3A5017 to search for variants of the digital switches. An switch multiplexer with 12Ohm internal resistance has a value of 12Ohm. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.3V. This multiplexer would work with 2.5μA current. An analogue multiplexer drains from a single voltage supply at 2.3V~3.6V. It may damage the digital multiplexer if the voltage is higher than 7μA. The transfer of data can be performed over 165MHz bandwidths. A analog switch ics with 8 outputs is included.