Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
41.900595mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Subcategory |
Multiplexer or Switches |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Base Part Number |
TS3A5018 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Power Supplies |
2.5/3.3V |
Number of Channels |
4 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
2.5μA |
Nominal Supply Current |
2.5μA |
Max Supply Current |
7μA |
Turn On Delay Time |
9.5 ns |
Supply Type |
Single |
Bandwidth |
300MHz |
Turn-Off Delay Time |
7.5 ns |
On-State Resistance (Max) |
10Ohm |
High Level Output Current |
64mA |
Low Level Output Current |
64mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
48 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
4.5pF 9pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
8ns, 6.5ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
300m Ω |
Crosstalk |
-48dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
10.5ns |
Switch-off Time-Max |
9ns |
Voltage - Supply, Single (V+) |
1.65V~3.6V |
Normal Position |
NC |
Signal Current-Max |
0.1A |
Height |
1.2mm |
Length |
3.6mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS3A5018DGVR Overview
As the electronic part is packed in 16-TFSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SPDT switching circuit are built. Use TS3A5018 to search for variants of the digital switches. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. Analogue multiplexers of the Single supply type that are cost-effective. 1.8V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 2.5μA. This analogue multiplexer requires a voltage of 1.65V~3.6V when it drains from a single voltage supply. Put voltage above 7μA on the multiplexer to cause damage. There are various bandwidths available for data transfer.
TS3A5018DGVR Features
4 Channels
Switch Circuit: SPDT
2.5μA Supply Current
Bandwidth: 300MHz
TS3A5018DGVR Applications
There are a lot of Texas Instruments TS3A5018DGVR Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Transmit
- DVD-R
- Modems
- Fault Tolerant Systems
- Imaging
- Digital access cross connects
- Remote wireless modules
- Battery Powered Systems
- Sample-and-hold systems