banner_page

TS3A5018PWRE4

8ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5018 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TS3A5018PWRE4
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 988
  • Description: 8ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A5018 16 Pins 100nA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 10Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Multiplexer or Switches
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number TS3A5018
Pin Count 16
Number of Outputs 8
Qualification Status Not Qualified
Power Supplies 2.5/3.3V
Number of Channels 4
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Operating Supply Current 2.5μA
Nominal Supply Current 2.5μA
Max Supply Current 7μA
Turn On Delay Time 9.5 ns
Number of Inputs 4
Supply Type Single
Bandwidth 300MHz
Turn-Off Delay Time 7.5 ns
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 48 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 4.5pF 9pF
On-state Resistance Match-Nom 0.4Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 8ns, 6.5ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 300m Ω
Crosstalk -48dB @ 10MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 10.5ns
Switch-off Time-Max 9ns
Voltage - Supply, Single (V+) 1.65V~3.6V
Normal Position NC
Signal Current-Max 0.1A
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TS3A5018PWRE4 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPDT switching circuits. Look for analog switch ic variants by searching with TS3A5018. A 10Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. An effective Single supply digital multiplexer. 2.3V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 2.5μA current. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. The switch multiplexer may be damaged if it is exposed to voltage greater than 7μA. In order to operate the 4 inputs, there are several steps to follow. This switch operates within the bandwidth of 300MHz. There are 8 outputs on the analogue multiplexer.

TS3A5018PWRE4 Features


4 Channels
Switch Circuit: SPDT
2.5μA Supply Current
Bandwidth: 300MHz

TS3A5018PWRE4 Applications


There are a lot of Texas Instruments TS3A5018PWRE4 Analog Switches & Multiplexers ICs applications.

  • E1 Multiplexer
  • Video switching
  • Battery Powered Systems
  • Video signal routing
  • Private Branch Exchange (PBX)
  • PDAs
  • E1 Network Equipment
  • Medical Instrumentation
  • Transmit
  • Existing multiplexer applications (both fault-protected and nonfault-protected)

Write a review

Note: HTML is not translated!
    Bad           Good