TS3DS26227YZTR

9ns, 4ns SPDT 5Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS3DS26227 12 Pins 5nA 2.5V 12-UFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS3DS26227YZTR
Package: 12-UFBGA, DSBGA
Datasheet: -
Stock: 554
Description: 9ns, 4ns SPDT 5Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS3DS26227 12 Pins 5nA 2.5V 12-UFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	12-UFBGA, DSBGA
Number of Pins	12
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	12
ECCN Code	EAR99
Resistance	5Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Additional Feature	ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TS3DS26227
Pin Count	12
Number of Outputs	4
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	2.3V
Operating Supply Current	1μA
Max Supply Current	20nA
Turn On Delay Time	9 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	800MHz
Turn-Off Delay Time	4 ns
-3db Bandwidth	80MHz
On-State Resistance (Max)	5Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	3.5pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	9ns, 4ns
Charge Injection	5.5pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-39dB @ 200MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	13ns
Switch-off Time-Max	5.5ns
Voltage - Supply, Single (V+)	2.3V~3.6V
Height	625μm
Length	0m
Width	0m
Thickness	480μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3DS26227YZTR Overview

Shipping overseas is convenient due to the electrical component's packing in 12-UFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 12 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 12 pins. A SPDT switching circuit is used to build these analog multiplexers. Using the TS3DS26227 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 5Ohm. Please refer to the datasheets for 12 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.3V. 1μA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 2.3V~3.6V volts. The analogue multiplexer may be damaged if voltage is greater than 20nA. There are 2 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 800MHz bandwidths. Don't miss this electronic component's additional features, such as: ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V. There are 4 outputs on the analogue multiplexer.

TS3DS26227YZTR Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 80MHz
Bandwidth: 800MHz
Additional Features: ALSO REQUIRES AN SUPPLY OF 1.65V TO 1.95V