TS5A1066DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A1066 |
| Output | COMMON OUTPUT |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 50nA |
| Nominal Supply Current | 50nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5.5 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 400MHz |
| Turn-Off Delay Time | 4.5 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 6.8pF 6.8pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5.5ns, 4.5ns |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A1066DBVRG4 Overview
This electronic part is conveniently packaged in SC-74A, SOT-753, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 5 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. There are 5 pins injected into the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for the analog switch ic with TS5A1066 if you are looking for variants. As far as internal resistance is concerned, it has 10Ohm. For details about the functions of 5 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.65V. For this digital switch to work, 50nA current would suffice. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The outputs of this digital multiplexer are COMMON OUTPUT in number. It is possible to operate 1 inputs. A 400MHz-bandwidth can be used for data transfer.
TS5A1066DBVRG4 Features
1 Channels
Switch Circuit: SPST - NO
50nA Supply Current
Bandwidth: 400MHz
TS5A1066DBVRG4 Applications
There are a lot of Texas Instruments TS5A1066DBVRG4 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Microwave transmission systems
- Medical systems
- Digital Cross-Connects
- Modems
- Mechanical reed relay replacement
- Communication systems
- Intelligent PBX
- Access Concentrators
- Public switching systems
