TS5A12301EYFPR

225ns, 215ns SPDT 750mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A12301 6 Pins 20nA 2.5V 6-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A12301EYFPR
Package: 6-XFBGA, DSBGA
Datasheet: -
Stock: 857
Description: 225ns, 215ns SPDT 750mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A12301 6 Pins 20nA 2.5V 6-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-XFBGA, DSBGA
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	750mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.4mm
Base Part Number	TS5A12301
Pin Count	6
Number of Outputs	2
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.25V
Operating Supply Current	10μA
Max Supply Current	10μA
Turn On Delay Time	225 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	55MHz
Turn-Off Delay Time	215 ns
On-State Resistance (Max)	750mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	28pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	225ns, 215ns
Charge Injection	97pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-63dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.25V~5.5V
Height	500μm
Length	1mm
Width	1.4mm
Thickness	500μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A12301EYFPR Overview

The electronic component is convenient to ship overseas because it is packed in a 6-XFBGA, DSBGA. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. There are 6 terminations totally. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. The electronic part body is injected with 6 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with TS5A12301 if you are looking for variants. It has an internal resistance of 750mOhm. Datasheets for 6 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. The lowest voltage the electronic part should receive is 2.25V. For this digital switch to work, 10μA current would suffice. The voltage required by this switch device is 2.25V~5.5V, draining from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. Among the inputs that can be operated are the 1 inputs. In 55MHz-bandwidths, data can be transferred. The analogue multiplexer has 2 outputs.