TS5A2053DCTRE4

6.8ns, 4.1ns SPDT 13.8Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2053 8 Pins 1.8V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A2053DCTRE4
Package: 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Datasheet: -
Stock: 127
Description: 6.8ns, 4.1ns SPDT 13.8Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2053 8 Pins 1.8V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins	8
Weight	23.388357mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	13.8Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Base Part Number	TS5A2053
Pin Count	8
Number of Outputs	2
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	1μA
Turn On Delay Time	6.8 ns
Input Voltage (Max)	6.5V
Number of Inputs	1
Supply Type	Single
Bandwidth	330MHz
Turn-Off Delay Time	4.1 ns
On-State Resistance (Max)	13.8Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Channel Capacitance (CS(off), CD(off))	6pF 9.5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	6.8ns, 4.1ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-68dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	6.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.3mm
Length	2.95mm
Width	2.8mm
Thickness	1.29mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A2053DCTRE4 Overview

The electrical component comes in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. 8 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. There are 1 circuits in this switch device. Try searching for the analog switch ic with TS5A2053 if you are looking for variants. In this multiplexer, the internal resistance is 13.8Ohm. Datasheets for functions of 8 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 5.5V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 100nA current would be sufficient. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. Operating the 1 inputs requires 1 inputs. The data can be transferred over a wide range of bandwidths, called 330MHz bandwidths. This digital multiplexer has 2 outputs.