TS5A2053DCUR

6.8ns, 4.1ns SPDT 13.8Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2053 8 Pins 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A2053DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 915
Description: 6.8ns, 4.1ns SPDT 13.8Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2053 8 Pins 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	13.8Ohm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A2053
Pin Count	8
Number of Outputs	2
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	1μA
Turn On Delay Time	6.8 ns
Input Voltage (Max)	6.5V
Supply Type	Single
Bandwidth	330MHz
Turn-Off Delay Time	4.1 ns
On-State Resistance (Max)	13.8Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Channel Capacitance (CS(off), CD(off))	6pF 9.5pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	6.8ns, 4.1ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-68dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	6.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A2053DCUR Overview

Packed in 8-VFSOP (0.091, 2.30mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. There is an electrical component included in the 8 series. Based on SPDT switching circuits, these analog multiplexers work. A 1 circuit is present in this switch device. Try searching with TS5A2053 if you're looking for variants. There is 13.8Ohm internal resistance in this digital multiplexer. You can find the functions of the 8 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. There should be 1.65V voltage fed to the electrical part below 1.65V. The switch device would be able to operate with 100nA current. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. 330MHz bandwidths enable data to be transferred. 2 outputs are included in the analogue multiplexer.