TS5A2066DCTRE4

5.8ns, 3.6ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2066 8 Pins 30nA 1.8V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A2066DCTRE4
Package: 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Datasheet: -
Stock: 865
Description: 5.8ns, 3.6ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2066 8 Pins 30nA 1.8V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins	8
Weight	23.388357mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Base Part Number	TS5A2066
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	6.4 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	4.9 ns
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	30nA
Channel Capacitance (CS(off), CD(off))	5.5pF 5.5pF
On-state Resistance Match-Nom	0.9Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	5.8ns, 3.6ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-68dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	11.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	1.3mm
Length	2.95mm
Width	2.8mm
Thickness	1.29mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A2066DCTRE4 Overview

The electronic component is convenient to ship overseas because it is packed in a 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. In total, 8 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. Into the electrical component body are injected 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with TS5A2066 to find analog multiplexer variants. It has an internal resistance of 10Ohm. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. 100nA current would be enough for this multiplexer to operate. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It is possible to operate 2 inputs. It is possible to transfer data over a 300MHz-bandwidth.