TS5A2066DCURG4

5.8ns, 3.6ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2066 8 Pins 30nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A2066DCURG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 800
Description: 5.8ns, 3.6ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2066 8 Pins 30nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A2066
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	6.4 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	4.9 ns
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	30nA
Channel Capacitance (CS(off), CD(off))	5.5pF 5.5pF
On-state Resistance Match-Nom	0.9Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	5.8ns, 3.6ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-68dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	11.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A2066DCURG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, 8 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. A 1.8V voltage supply should turn on and run the electronic component. The electrical component body receives 8 pins. A SPST - NO switching circuit is used to build these analog multiplexers. Look for analog switch ic variants by searching with TS5A2066. In this multiplexer, the internal resistance is 10Ohm. For details about the functions of 8 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this multiplexer to operate, 100nA current would be sufficient. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. The electrical component supports 2 inputs. In 300MHz-bandwidths, data can be transferred.