TS5A21366DCUR

72ns, 318ns SPST - NO 1Ohm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A21366 8 Pins 10nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A21366DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 310
Description: 72ns, 318ns SPST - NO 1Ohm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A21366 8 Pins 10nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	1Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A21366
Output	SEPARATE OUTPUT
Pin Count	8
Polarity	Non-Inverting
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	9μA
Max Supply Current	9μA
Throw Configuration	SPST
Turn On Delay Time	72 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	260MHz
Turn-Off Delay Time	318 ns
On-State Resistance (Max)	1Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	19pF 17pF
On-state Resistance Match-Nom	0.045Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	72ns, 318ns
Charge Injection	1.3pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-98dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	514ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	750mOhm
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TS5A21366DCUR Overview

This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. In total, there are 8 terminations. A electrical component with 2 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. A total of 8 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. Using the TS5A21366 search parameter, you can discover variants of the switch. This digital multiplexer has 1Ohm internal resistance. Datasheets for 8 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. It would be sufficient to run this analogue multiplexer with 9μA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 9μA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating the 2 inputs requires 2 inputs. In 260MHz-bandwidths, data can be transferred. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. There is 750mOhm Drain to Source resistance on this electronic part.