TS5A21366RSER

72ns, 318ns SPST - NO 1Ohm QUAD Analog Switches MAKE-BEFORE-BREAK TS5A21366 8 Pins 10nA 1.8V 8-UFQFN

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A21366RSER
Package: 8-UFQFN
Datasheet: -
Stock: 259
Description: 72ns, 318ns SPST - NO 1Ohm QUAD Analog Switches MAKE-BEFORE-BREAK TS5A21366 8 Pins 10nA 1.8V 8-UFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFQFN
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	1Ohm
Terminal Finish	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A21366
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Nominal Supply Current	7.6μA
Max Supply Current	9μA
Throw Configuration	SPST
Turn On Delay Time	72 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	260MHz
Turn-Off Delay Time	318 ns
On-State Resistance (Max)	1Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	59 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	19pF 17pF
On-state Resistance Match-Nom	0.045Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	72ns, 318ns
Charge Injection	1.3pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-98dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	514ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	600μm
Length	1.5mm
Width	1.5mm
Thickness	550μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TS5A21366RSER Overview

Shipping overseas is convenient due to the electrical component's packing in 8-UFQFN. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~85°C TA are extended for operation. There are 8 terminations totally. The electronic part delivers high-quality output through its 2 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. Electronic part bodies are injected with 8 pins. Multiplexers built on a SPST - NO switching circuit are built. Using the TS5A21366 search parameter, you can discover variants of the switch. This digital multiplexer has 1Ohm internal resistance. The datasheets for the 8 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 9μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating 2 inputs is required. It is possible to transfer data over a 260MHz-bandwidth. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION.