TS5A22362YZPR
| Parameters | |
|---|---|
| Current - Leakage (IS(off)) (Max) | 50nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| On-state Resistance Match-Nom | 0.023Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 80ns, 70ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -78dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.3V~5.5V |
| Height | 500μm |
| Length | 2.25mm |
| Width | 1.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-XFBGA, DSBGA |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 650mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A22362 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 200nA |
| Nominal Supply Current | 200nA |
| Max Supply Current | 1.3μA |
| Turn On Delay Time | 80 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 18.3MHz |
| Turn-Off Delay Time | 70 ns |
| On-State Resistance (Max) | 740mOhm |
| High Level Output Current | 150mA |
| Low Level Output Current | 150mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 66 dB |
TS5A22362YZPR Overview
As the electronic part is packed in 10-XFBGA, DSBGA, international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. In total, 10 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. This electrical component is included in the 10 series of products. A SPDT switching circuit is used to build these analog multiplexers. TS5A22362 can be used to search for analog multiplexer variants. It has an internal resistance of 650mOhm. Datasheets for 10 pin functions are available upon request. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2.3V. 200nA current would be enough for this multiplexer to operate. A voltage of 2.3V~5.5V is required for this switch device, which drains from a single voltage source. The analogue multiplexer may be damaged if voltage is greater than 1.3μA. It is possible to operate 2 inputs. 18.3MHz bandwidths enable data to be transferred. The analog switch ics includes 4 outputs.
TS5A22362YZPR Features
1 Channels
Switch Circuit: SPDT
200nA Supply Current
Bandwidth: 18.3MHz
TS5A22362YZPR Applications
There are a lot of Texas Instruments TS5A22362YZPR Analog Switches & Multiplexers ICs applications.
- Transmit
- Switching Systems
- Fiber In The Loop (FITL)
- Power routing
- Mechanical reed relay replacement
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital access cross connects
- Medical Instrumentation
- Multi-Line E1 Interface Cards
- Relay replacements
