TS5A22364DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 650mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A22364 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 200nA |
| Nominal Supply Current | 200nA |
| Max Supply Current | 1.3μA |
| Turn On Delay Time | 80 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 18.3MHz |
| Turn-Off Delay Time | 70 ns |
| On-State Resistance (Max) | 740mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 66 dB |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| On-state Resistance Match-Nom | 0.023Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 80ns, 70ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -78dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.3V~5.5V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A22364DRCR Overview
The electronic component is convenient to ship overseas because it is packed in a 10-VFDFN Exposed Pad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. There are 10 terminations totally. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. It is part of the design of the 10 series that this electronic component is included. Unlike digital switches, these are based on SPDT switching circuits. Using the TS5A22364 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 650mOhm. Datasheets for functions of 10 pins are available. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2.3V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 200nA current. Draining from a single voltage supply, this analog switch requires a voltage of 2.3V~5.5V. Put voltage above 1.3μA on the multiplexer to cause damage. Operating 2 inputs is required. There are various bandwidths available for data transfer. The analogue multiplexer has 4 outputs.
TS5A22364DRCR Features
1 Channels
Switch Circuit: SPDT
200nA Supply Current
Bandwidth: 18.3MHz
TS5A22364DRCR Applications
There are a lot of Texas Instruments TS5A22364DRCR Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Low-Voltage
- Battery-powered systems
- Wireless Local Loop
- Channelized and Unchannelized DS3 applications
- DSUs
- FTTH
- USB 1.1 signal switching circuits
- CSU
- Medical systems
