TS5A22364YZPR

80ns, 70ns SPDT 740mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A22364 10 Pins 50nA 2.5V 10-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A22364YZPR
Package: 10-XFBGA, DSBGA
Datasheet: PDF
Stock: 204
Description: 80ns, 70ns SPDT 740mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A22364 10 Pins 50nA 2.5V 10-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-XFBGA, DSBGA
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	650mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	TS5A22364
Pin Count	10
Number of Outputs	4
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.3V
Operating Supply Current	200nA
Nominal Supply Current	200nA
Max Supply Current	1.3μA
Turn On Delay Time	80 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	18.3MHz
Turn-Off Delay Time	70 ns
On-State Resistance (Max)	740mOhm
High Level Output Current	150mA
Low Level Output Current	150mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	66 dB
Current - Leakage (IS(off)) (Max)	50nA
Channel Capacitance (CS(off), CD(off))	70pF
On-state Resistance Match-Nom	0.023Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	80ns, 70ns
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-78dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.3V~5.5V
Height	500μm
Length	2.25mm
Width	1.25mm
Thickness	310μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A22364YZPR Overview

As the electronic part is packed in 10-XFBGA, DSBGA, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 10 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 2.5V voltage supply should turn on and run the electronic component. A total of 10 pins are injected into the electrical part body. A SPDT switching circuit is used to build these analog multiplexers. If you are looking for variants of the digital switch, trying search with TS5A22364. An switch multiplexer with 650mOhm internal resistance has a value of 650mOhm. The functions of 10 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2.3V. For this multiplexer to operate, 200nA current would be sufficient. A voltage of 2.3V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 1.3μA on the multiplexer may cause damage. Operating the 2 inputs requires 2 inputs. There are various bandwidths available for data transfer. A analog switch ics with 4 outputs is included.