TS5A23159RSER

13ns, 8ns SPDT 900mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS5A23159 10 Pins 20nA 1.8V 10-UFQFN

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23159RSER
Package: 10-UFQFN
Datasheet: -
Stock: 910
Description: 13ns, 8ns SPDT 900mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS5A23159 10 Pins 20nA 1.8V 10-UFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Weight	7.002332mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23159
Pin Count	10
Number of Outputs	4
Power Supplies	1.8/5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Max Supply Current	50nA
Turn On Delay Time	13 ns
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	8 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	13ns, 8ns
Charge Injection	-7pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	900mOhm
Signal Current-Max	0.1A
Height	600μm
Length	1.5mm
Width	2mm
Thickness	550μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23159RSER Overview

The electronic part can be shipped overseas conveniently because it is packaged in 10-UFQFN. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 10. The electronic part delivers high-quality output through its 2 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. 10 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. Use TS5A23159 to search for variants of the digital switches. A 900mOhm internal resistance characterizes this multiplexer. To find out what the functions of 10 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. In order for the electronic part to function properly, the lowest voltage should be 1.65V. The switch device would be able to operate with 10nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. Putting voltage greater than 50nA on the multiplexer may cause damage. This switch operates within the bandwidth of 100MHz. Additional features of the electronic component include: VIDEO APPLICATION. It has a Drain to Source resistance of 900mOhm ohms. A analog switch ics with 4 outputs is included.