TS5A23160DGSRG4

5.5ns, 10ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A23160 10 Pins 20nA 1.8V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23160DGSRG4
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 822
Description: 5.5ns, 10ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A23160 10 Pins 20nA 1.8V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Weight	19.986414mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23160
Output	SEPARATE OUTPUT
Pin Count	10
Power Supplies	1.8/5V
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	500nA
Turn On Delay Time	14.5 ns
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	21.5 ns
-3db Bandwidth	95MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	5.5ns, 10ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.07mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23160DGSRG4 Overview

The electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature around -40°C~85°C TA extended. A total of 10 terminations have been recorded. The electronic part provides high-quality output because it has 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 10 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPDT switching circuits. There are 2 circuits in this switch device. Use TS5A23160 to search for variants of the digital switches. This digital multiplexer has 900mOhm internal resistance. Please refer to the datasheets for 10 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Single supply. There should be 1.65V voltage fed to the electrical part below 1.65V. This multiplexer would work with 10nA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. If you put voltage higher than 500nA on the digital multiplexer, damage may occur. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The transfer of data can be performed over 100MHz bandwidths.