TS5A23166DCUR

7.5ns, 11ns SPST - NO 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A23166 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23166DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 676
Description: 7.5ns, 11ns SPST - NO 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A23166 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23166
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	9 ns
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	15.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	900mOhm
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23166DCUR Overview

This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 8 terminations. The electronic part delivers high-quality output through its 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO switching circuits. TS5A23166 can be used to search for analog multiplexer variants. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. Datasheets for 8 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 1.65V. This multiplexer would work with 10nA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 100nA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 150MHz bandwidths for data transfer. It has a Drain to Source resistance of 900mOhm ohms.