TS5A23166DCURG4

7.5ns, 11ns SPST - NO 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A23166 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23166DCURG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 643
Description: 7.5ns, 11ns SPST - NO 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A23166 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	9 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	15.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23166

TS5A23166DCURG4 Overview

This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 8 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. It is part of the design of the 8 series that this electronic component is included. A SPST - NO switching circuit is used for these analog switches. If you are looking for variants of the digital switch, trying search with TS5A23166. It has an internal resistance of 900mOhm. Datasheets for 8 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. 10nA current would be enough for this multiplexer to operate. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 100nA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A 2 input needs to be operated. 150MHz-bandwidths can be used to transfer data between multiplexers.