TS5A23166YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Weight | 2.296311mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A23166 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 18 ns |
| Supply Type | Single |
| Bandwidth | 150MHz |
| Turn-Off Delay Time | 15.5 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 7.5ns, 11ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A23166YZPR Overview
Presented in 8-XFBGA, DSBGA, this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. A 2 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO switching circuits. Try searching with TS5A23166 to find analog multiplexer variants. There is 900mOhm internal resistance in this digital multiplexer. To find out what the 8 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. An operating current of 10nA would be sufficient for this switch device. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. When the digital multiplexer is charged above 100nA, damage can occur. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The transfer of data can be performed over 150MHz bandwidths.
TS5A23166YZPR Features
2 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 150MHz
TS5A23166YZPR Applications
There are a lot of Texas Instruments TS5A23166YZPR Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Audio/video switches
- PDH Multiplexers
- Digital cross connects (DSX-1)
- Communication systems
- Medical Instrumentation
- Data switching
- E1 Multiplexer
- DSUs
- Medical systems
