TS5A23166YZTR

7.5ns, 11ns SPST - NO 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A23166 8 Pins 20nA 1.8V 8-UFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23166YZTR
Package: 8-UFBGA, DSBGA
Datasheet: -
Stock: 838
Description: 7.5ns, 11ns SPST - NO 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A23166 8 Pins 20nA 1.8V 8-UFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFBGA, DSBGA
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23166
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	9 ns
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	15.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	625μm
Length	1.98mm
Width	980μm
Thickness	430μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23166YZTR Overview

Due to its 8-UFBGA, DSBGA packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 8. By its 2 channels, the electronic component provides high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 8 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with TS5A23166 to find analog multiplexer variants. Analog switches have 900mOhm internal resistance. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. For this multiplexer to operate, 10nA current would be sufficient. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A voltage higher than 100nA may cause damage to the switch multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. This switch operates within the bandwidth of 150MHz.