TS5A23167DCUR

7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A23167 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23167DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 172
Description: 7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A23167 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23167
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	18 ns
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	15.5 ns
-3db Bandwidth	150MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23167DCUR Overview

Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 8. As a result of its 2 channels, this electronic component provides high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. This electronic part can be found in the 8 series. SPST - NC switching circuits are used in these analog switch ics. Try searching with TS5A23167 if you're looking for variants. In this multiplexer, the internal resistance is 900mOhm. Datasheets for 8 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 10nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. If you put voltage higher than 100nA on the digital multiplexer, damage may occur. There are SEPARATE OUTPUT outputs on this analog switch ic. This switch operates within the bandwidth of 150MHz.