TS5A23167DCURG4

7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A23167 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23167DCURG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 118
Description: 7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A23167 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23167
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	18 ns
Number of Inputs	2
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	15.5 ns
-3db Bandwidth	150MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23167DCURG4 Overview

This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 8. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. This electronic part can be found in the 8 series. These analog multiplexers are built based on SPST - NC switching circuits. Look for analog switch ic variants by searching with TS5A23167. There is 900mOhm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. For this multiplexer to operate, 10nA current would be sufficient. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. Putting voltage greater than 100nA on the multiplexer may cause damage. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical component supports 2 inputs. In 150MHz-bandwidths, data can be transferred.