TS5A23167YZPR

7.5ns, 11ns SPST - NC 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A23167 8 Pins 20nA 1.8V 8-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A23167YZPR
Package: 8-XFBGA, DSBGA
Datasheet: -
Stock: 111
Description: 7.5ns, 11ns SPST - NC 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A23167 8 Pins 20nA 1.8V 8-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFBGA, DSBGA
Number of Pins	8
Weight	2.296311mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A23167
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	18 ns
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	15.5 ns
-3db Bandwidth	150MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	40m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	500μm
Length	1.25mm
Width	2.25mm
Thickness	310μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A23167YZPR Overview

Presented in 8-XFBGA, DSBGA, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. A total of 8 terminations have been recorded. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. As part of the design of the 8 series, this electronic part has been incorporated into the system. These analog multiplexers are built based on SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with TS5A23167. In this multiplexer, the internal resistance is 900mOhm. Datasheets for functions of 8 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexers of the Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 10nA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. When the digital multiplexer is charged above 100nA, damage can occur. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. In 150MHz-bandwidths, data can be transferred.