TS5A3153DCUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A3153 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 20nA |
| Max Supply Current | 100nA |
| Turn On Delay Time | 16 ns |
| Supply Type | Single |
| Bandwidth | 97MHz |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Channel Capacitance (CS(off), CD(off)) | 19pF 36pF |
| On-state Resistance Match-Nom | 0.16Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 16ns, 15ns |
| Charge Injection | 12pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -64dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 63ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3153DCUR Overview
As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. In total, 8 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. Look for analog switch ic variants by searching with TS5A3153. The internal resistance of this digital multiplexer is 900mOhm. For details about the functions of 8 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 1.65V. For this digital switch to work, 20nA current would suffice. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. A digital multiplexer may suffer damage if voltage is applied above 100nA. This switch operates within the bandwidth of 97MHz. In this digital multiplexer, there are 2 outputs.
TS5A3153DCUR Features
1 Channels
Switch Circuit: SPDT
20nA Supply Current
Bandwidth: 97MHz
TS5A3153DCUR Applications
There are a lot of Texas Instruments TS5A3153DCUR Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Medical Instrumentation
- Sample-and-hold systems
- Cable PC
- Power routing
- Industrial control systems
- SONET
- Access Concentrators
- Precision test equipment
- Industrial
