TS5A3154DCUR

16ns, 15ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3154 8 Pins 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3154DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 466
Description: 16ns, 15ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3154 8 Pins 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	10.007382mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	900mOhm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3154
Pin Count	8
Number of Outputs	2
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	20nA
Nominal Supply Current	20nA
Max Supply Current	100nA
Turn On Delay Time	20.5 ns
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	27.5 ns
On-State Resistance (Max)	900mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Channel Capacitance (CS(off), CD(off))	19pF 36pF
On-state Resistance Match-Nom	0.16Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	16ns, 15ns
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3154DCUR Overview

Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~85°C TA. 8 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 8 pins. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with TS5A3154 if you are looking for variants. This digital multiplexer has 900mOhm internal resistance. The functions of 8 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Analog switch ics with Single supply type are cost-effective. 1.65V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 20nA. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 100nA. In 100MHz-bandwidths, data can be transferred. A analog switch ics with 2 outputs is included.