TS5A3154DCURG4

16ns, 15ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3154 8 Pins 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3154DCURG4
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 460
Description: 16ns, 15ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3154 8 Pins 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3154
Pin Count	8
Number of Outputs	2
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	20nA
Nominal Supply Current	20nA
Max Supply Current	100nA
Turn On Delay Time	8 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	12.5 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Channel Capacitance (CS(off), CD(off))	19pF 36pF
On-state Resistance Match-Nom	0.16Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	16ns, 15ns
Charge Injection	12pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3154DCURG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. A 1.8V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 8 pins. SPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 1. TS5A3154 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 900mOhm. Datasheets for 8 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. 20nA current would be enough for this multiplexer to operate. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. Operating the 1 inputs requires 1 inputs. This switch operates within the bandwidth of 100MHz. In this digital multiplexer, there are 2 outputs.