TS5A3157DBVR

8.5ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3157DBVR
Package: SOT-23-6
Datasheet: -
Stock: 515
Description: 8.5ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V SOT-23-6(Kg)

Details

Tags

Parameters
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	8.5ns, 6.5ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-66dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	12Ohm
Normal Position	NC
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	10Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.95mm
Base Part Number	TS5A3157
Pin Count	6
Number of Outputs	2
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	5μA
Turn On Delay Time	8.5 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	6.5 ns
On-State Resistance (Max)	10Ohm
High Level Output Current	100mA
Low Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5.5pF
On-state Resistance Match-Nom	0.5Ohm

TS5A3157DBVR Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -40°C~85°C TA. 6 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. Into the electrical component body are injected 6 pins. A SPDT switching circuit is used to build these analog multiplexers. TS5A3157 can be used to search for analog multiplexer variants. A 10Ohm internal resistance characterizes this multiplexer. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.65V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 2.5μA. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 5μA. 300MHz-bandwidths can be used to transfer data between multiplexers. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION. Resistivity from Drain to Source is 12Ohm for this electronic part. 2 outputs are included in the analogue multiplexer.