TS5A3157DCKR

8.5ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V 6-TSSOP, SC-88, SOT-363

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3157DCKR
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: -
Stock: 130
Description: 8.5ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	5.5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	8.5ns, 6.5ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-66dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	10Ohm
Normal Position	NC
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Weight	2.494758mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	10Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS5A3157
Pin Count	6
Number of Outputs	2
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	5μA
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	7.5 ns
On-State Resistance (Max)	10Ohm
High Level Output Current	100mA
Low Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	100nA

TS5A3157DCKR Overview

The electronic component is convenient to ship overseas because it is packed in a 6-TSSOP, SC-88, SOT-363. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. Operation at a temperature around -40°C~85°C TA. In total, 6 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. Electronic part bodies are injected with 6 pins. SPDT switching circuits are used in these analog switch ics. Use TS5A3157 to search for variants of the digital switches. It has an internal resistance of 10Ohm. Datasheets for 6 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 2.5μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 5μA. It is possible to transfer data over a 300MHz-bandwidth. Additional features include: VIDEO APPLICATION. Drain to Source resistance for this electronic component is 10Ohm. In this digital multiplexer, there are 2 outputs.