TS5A3157DCKRE4

8.5ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V 6-TSSOP, SC-88, SOT-363

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3157DCKRE4
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: -
Stock: 882
Description: 8.5ns, 6.5ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Weight	2.494758mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS5A3157
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	5μA
Turn On Delay Time	8.5 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	6.5 ns
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5.5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	8.5ns, 6.5ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-66dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3157DCKRE4 Overview

Due to its 6-TSSOP, SC-88, SOT-363 packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Operational temperature extended around -40°C~85°C TA. A total of 6 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 6 series. SPDT switching circuits are used in these analog switch ics. Try searching for the analog switch ic with TS5A3157 if you are looking for variants. It has an internal resistance of 10Ohm. Please refer to the datasheets for 6 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. The digital multiplexer has a low cost Single supply. It is recommended that the electrical component receives a voltage of 1.65V. 2.5μA current would be enough for this multiplexer to operate. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. Putting voltage greater than 5μA on the multiplexer may cause damage. There are 1 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION. There are 2 outputs on the analogue multiplexer.