TS5A3157YZPR

8.5ns, 6.5ns SPDT 10Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V 6-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3157YZPR
Package: 6-XFBGA, DSBGA
Datasheet: -
Stock: 688
Description: 8.5ns, 6.5ns SPDT 10Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A3157 6 Pins 100nA 1.8V 6-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-XFBGA, DSBGA
Number of Pins	6
Weight	1.700971mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3157
Pin Count	6
Number of Outputs	2
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	2.5μA
Nominal Supply Current	2.5μA
Max Supply Current	5μA
Turn On Delay Time	9.5 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	7.5 ns
On-State Resistance (Max)	10Ohm
High Level Output Current	100mA
Low Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5.5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	8.5ns, 6.5ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	150m Ω
Crosstalk	-66dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	500μm
Length	1.5mm
Width	900μm
Thickness	2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3157YZPR Overview

Packed in 6-XFBGA, DSBGA, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used to build these analog multiplexers. Try searching with TS5A3157 if you're looking for variants. This digital multiplexer has 10Ohm internal resistance. Please refer to the datasheets for 6 pins functions. Multiplexer or Switches is a typical switch device. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this digital switch to work, 2.5μA current would suffice. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 5μA. It is possible to transfer data over a 300MHz-bandwidth. Additional features of the electronic component include: VIDEO APPLICATION. An output of 2 is provided by the digital multiplexer.