Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
900mOhm |
Subcategory |
Multiplexer or Switches |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Base Part Number |
TS5A3159 |
Pin Count |
6 |
Number of Outputs |
2 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
100nA |
Nominal Supply Current |
10nA |
Max Supply Current |
50nA |
Turn On Delay Time |
35 ns |
Supply Type |
Single |
Bandwidth |
100MHz |
Turn-Off Delay Time |
30 ns |
On-State Resistance (Max) |
900mOhm |
High Level Output Current |
200mA |
Low Level Output Current |
200mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
64 dB |
Current - Leakage (IS(off)) (Max) |
20nA |
Channel Capacitance (CS(off), CD(off)) |
18pF |
On-state Resistance Match-Nom |
0.15Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
30ns, 20ns |
Charge Injection |
-20pC |
Channel-to-Channel Matching (ΔRon) |
50m Ω |
Crosstalk |
-64dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
75ns |
Switch-off Time-Max |
50ns |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS5A3159ADCKR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-TSSOP, SC-88, SOT-363. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature extended to -40°C~85°C TA. 6 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 6 pins. Multiplexers built on a SPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with TS5A3159. A 900mOhm internal resistance characterizes this multiplexer. Datasheets for 6 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. 1.65V should be the lowest voltage fed to the electronic component. This multiplexer would work with 100nA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. Put voltage above 50nA on the multiplexer to cause damage. There are 100MHz bandwidths for data transfer. 2 outputs are included in the analogue multiplexer.
TS5A3159ADCKR Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 100MHz
TS5A3159ADCKR Applications
There are a lot of Texas Instruments TS5A3159ADCKR Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Relay replacements
- High speed data transmission line cards
- Cell phones
- DVD-R
- HDTV
- Wireless Local Loop
- Digital cross connects (DSX-1)
- Precision data acquisition
- E1 Network Equipment