TS5A3159ADCKTG4

DUAL Analog Switches BREAK-BEFORE-MAKE 6 Pins 1.8V SOT-70-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159ADCKTG4
Package: SOT-70-6
Datasheet: PDF
Stock: 989
Description: DUAL Analog Switches BREAK-BEFORE-MAKE 6 Pins 1.8V SOT-70-6(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	SOT-70-6
Number of Pins	6
Weight	2.494758mg
Packaging	Tape and Reel
JESD-609 Code	e4
Moisture Sensitivity Level (MSL)	1
Number of Terminations	6
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Pin Count	6
Number of Outputs	2
Temperature Grade	INDUSTRIAL
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	10nA
Max Supply Current	50nA
Throw Configuration	SPDT
Turn On Delay Time	35 ns
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	30 ns
Off-state Isolation-Nom	64 dB
On-state Resistance Match-Nom	0.15Ohm
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	50ns
Height	900μm
Length	2mm
Width	1.25mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

TS5A3159ADCKTG4 Overview

This electronic part is conveniently packaged in SOT-70-6, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape and Reel is used. Total terminations are 6. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. As part of its design, the 6 series is equipped with this electronic component. A 1.1Ohm internal resistance characterizes this multiplexer. To find out what the 6 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 100nA current. Putting voltage greater than 50nA on the multiplexer may cause damage. The data can be transferred over a wide range of bandwidths, called 100MHz bandwidths. The switches should not operate in an environment where the temperature is higher than 85°C. A analog switch ics with 2 outputs is included.