TS5A3159AYZPR

30ns, 20ns SPDT 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 20nA 1.8V 6-XFBGA, DSBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159AYZPR
Package: 6-XFBGA, DSBGA
Datasheet: -
Stock: 200
Description: 30ns, 20ns SPDT 900mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 20nA 1.8V 6-XFBGA, DSBGA(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-XFBGA, DSBGA
Number of Pins	6
Weight	1.700971mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory	Multiplexer or Switches
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3159
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	10nA
Max Supply Current	50nA
Turn On Delay Time	35 ns
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	30 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	30ns, 20ns
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	500μm
Length	1.5mm
Width	900μm
Thickness	2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3159AYZPR Overview

Packed in 6-XFBGA, DSBGA, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 6. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. It is injected into the electrical part body with 6 pins. Unlike digital switches, these are based on SPDT switching circuits. Using the TS5A3159 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 1.1Ohm. For details about the functions of 6 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. This digital switch can be operated with a current of 100nA. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 50nA. It is possible to transfer data over a 100MHz-bandwidth. The analog switch ics includes 2 outputs.