TS5A3159DBVRG4

35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159DBVRG4
Package: SOT-23-6
Datasheet: -
Stock: 782
Description: 35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V SOT-23-6(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	23pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 20ns
Charge Injection	36pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-65dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	95ns
Switch-off Time-Max	70ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.95mm
Base Part Number	TS5A3159
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Max Supply Current	100nA
Turn On Delay Time	20 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	15 ns
On-State Resistance (Max)	1.1Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	2nA

TS5A3159DBVRG4 Overview

Presented in SOT-23-6, this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 6. Due to its 1 channels, the electrical component produces high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. The electrical component body receives 6 pins. A SPDT switching circuit is used for these analog switches. Try searching with TS5A3159 to find analog multiplexer variants. Analog switches have 1.1Ohm internal resistance. To find out what the functions of 6 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. A low voltage of 1.65V should be applied to the electronic component. The analogue multiplexer could operate on 100nA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 100nA, damage can occur. The electrical component supports 1 inputs. 100MHz-bandwidths can be used to transfer data between multiplexers. There are 2 outputs on the analogue multiplexer.