TS5A3159DBVT

35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159DBVT
Package: SOT-23-6
Datasheet: -
Stock: 722
Description: 35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.95mm
Base Part Number	TS5A3159
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	100nA
Turn On Delay Time	35 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	1.1Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	23pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 20ns
Charge Injection	36pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-65dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	95ns
Switch-off Time-Max	70ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3159DBVT Overview

Due to its SOT-23-6 packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. In total, there have been 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. A total of 6 pins are injected into the body of the electronic part. Based on SPDT switching circuits, these analog multiplexers work. Use TS5A3159 to search for variants of the digital switches. In this multiplexer, the internal resistance is 1.1Ohm. For functions related to 6 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This digital switch can be operated with a current of 100nA. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. Operating 1 inputs is required. 100MHz-bandwidths can be used to transfer data between multiplexers. The analogue multiplexer has 2 outputs.