Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
1.1Ohm |
Subcategory |
Multiplexer or Switches |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Base Part Number |
TS5A3159 |
Pin Count |
6 |
Number of Outputs |
2 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
100nA |
Nominal Supply Current |
100nA |
Max Supply Current |
100nA |
Turn On Delay Time |
35 ns |
Supply Type |
Single |
Bandwidth |
100MHz |
Turn-Off Delay Time |
20 ns |
On-State Resistance (Max) |
1.1Ohm |
High Level Output Current |
200mA |
Low Level Output Current |
200mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
63 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
23pF |
On-state Resistance Match-Nom |
0.7Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
35ns, 20ns |
Charge Injection |
36pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-65dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
95ns |
Switch-off Time-Max |
70ns |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Drain to Source Resistance |
750mOhm |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TS5A3159DCKR Overview
The electrical component comes in 6-TSSOP, SC-88, SOT-363 packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. In total, 6 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. An electrical component like this is included in the 6 series. A SPDT switching circuit is used to build these analog multiplexers. TS5A3159 can be used to search for analog multiplexer variants. It has an internal resistance of 1.1Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage fed to the electronic component should be 1.65V. For this digital switch to work, 100nA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Putting voltage greater than 100nA on the multiplexer may cause damage. The transfer of data can be performed over 100MHz bandwidths. This electronic component presents a Drain to Source resistance of 750mOhm. The analogue multiplexer has 2 outputs.
TS5A3159DCKR Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 100MHz
Drain-to-Source resistance: 750mOhm
TS5A3159DCKR Applications
There are a lot of Texas Instruments TS5A3159DCKR Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Cable Modem
- Audio/video switches
- Communication systems
- Medical systems
- Medical
- Precision test equipment
- Fiber In The Loop (FITL)
- Fault Tolerant Systems
- High reliability control systems