TS5A3159DCKT

35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V 6-TSSOP, SC-88, SOT-363

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159DCKT
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: -
Stock: 210
Description: 35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	23pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 20ns
Charge Injection	36pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-65dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	95ns
Switch-off Time-Max	70ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	1.5Ohm
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Weight	2.494758mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS5A3159
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	100nA
Max Supply Current	100nA
Turn On Delay Time	35 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	1.1Ohm

TS5A3159DCKT Overview

Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. The operating temperature is extended to around -40°C~85°C TA. 6 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used to build these analog multiplexers. Try searching for the analog switch ic with TS5A3159 if you are looking for variants. There is 1.1Ohm internal resistance in this digital multiplexer. The functions of 6 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Single supply type are cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. The analogue multiplexer could operate on 100nA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. Putting voltage greater than 100nA on the multiplexer may cause damage. In order to operate the 1 inputs, there are several steps to follow. A 100MHz-bandwidth can be used for data transfer. This electronic component presents a Drain to Source resistance of 1.5Ohm. An output of 2 is provided by the digital multiplexer.