TS5A3159QDBVRQ1

35ns, 20ns SPDT 1.3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6nA 1.8V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159QDBVRQ1
Package: SOT-23-6
Datasheet: -
Stock: 128
Description: 35ns, 20ns SPDT 1.3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6nA 1.8V SOT-23-6(Kg)

Details

Tags

Parameters
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	35 ns
On-State Resistance (Max)	1.3Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	6nA
Channel Capacitance (CS(off), CD(off))	23pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 20ns
Charge Injection	36pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-65dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	95ns
Switch-off Time-Max	70ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	1.3Ohm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.95mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TS5A3159
Number of Outputs	2
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Nominal Supply Current	10nA
Max Supply Current	500nA
Turn On Delay Time	40 ns

TS5A3159QDBVRQ1 Overview

Packed in SOT-23-6, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Increasing operating temperature to around -40°C~125°C TA. In total, there are 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. The analog switch ics are built using SPDT switching circuits. TS5A3159 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 1.3Ohm. For details about the functions of 6 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. An effective Single supply digital multiplexer. A low voltage of 1.65V should be applied to the electronic component. For this multiplexer to operate, 100nA current would be sufficient. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. Operating 1 inputs is required. There are various bandwidths available for data transfer. An output of 2 is provided by the digital multiplexer. Automotive, AEC-Q100 is a series number.