TS5A3160DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TS5A3160 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 50nA |
| Turn On Delay Time | 24 ns |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 27 ns |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 6ns, 13ns |
| Charge Injection | 36.5pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -64dB @ 10MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 900mOhm |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3160DBVR Overview
The electrical component comes in SOT-23-6 packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 6 terminations. The electronic part delivers high-quality output through its 1 channels. A 1.8V voltage supply should turn on and run the electronic component. This electrical component is included in the 6 series of products. A SPDT switching circuit is used for these analog switches. Try searching with TS5A3160 if you're looking for variants. This digital multiplexer has 900mOhm internal resistance. Datasheets for functions of 6 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.65V. This multiplexer would work with 10nA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 50nA. The data can be transferred over a wide range of bandwidths, called 100MHz bandwidths. A Drain to Source resistance of 900mOhm is shown for this electronic part. In this digital multiplexer, there are 2 outputs.
TS5A3160DBVR Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
Bandwidth: 100MHz
Drain-to-Source resistance: 900mOhm
TS5A3160DBVR Applications
There are a lot of Texas Instruments TS5A3160DBVR Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Remote wireless modules
- Microprocessor Controlled Analog Systems
- Wireless Local Loop
- Cable PC
- DSUs
- Communication systems
- Industrial and process control systems
- CSU
- ATM
