TS5A3160DBVT

6ns, 13ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3160 6 Pins 20nA 1.8V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3160DBVT
Package: SOT-23-6
Datasheet: PDF
Stock: 505
Description: 6ns, 13ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3160 6 Pins 20nA 1.8V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.95mm
Base Part Number	TS5A3160
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	50nA
Turn On Delay Time	24 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	27 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	6ns, 13ns
Charge Injection	36.5pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 10MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	1.1Ohm
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3160DBVT Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. In total, there are 6 terminations. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. There are 6 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. Try searching for the analog switch ic with TS5A3160 if you are looking for variants. Analog switches have 1.1Ohm internal resistance. To find out what the functions of 6 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. There should be 1.65V voltage fed to the electrical part below 1.65V. It would be sufficient to run this analogue multiplexer with 10nA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 50nA. Operating the 1 inputs requires 1 inputs. In 100MHz-bandwidths, data can be transferred. There is 1.1Ohm resistance between Drain and Source for this electronic part. The analog switch ics has 2 outputs.