TS5A3160DBVTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 50nA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 24 ns |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 27 ns |
| Off-state Isolation-Nom | 64 dB |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 30ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TS5A3160DBVTE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23. High reliability is ensured by the advanced packaging method Tape and Reel. There are 6 terminations totally. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A total of 6 pins are injected into the electrical part body. Analog switches have 900mOhm internal resistance. For functions related to 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. For this digital switch to work, 10nA current would suffice. Put voltage above 50nA on the multiplexer to cause damage. It is possible to transfer data over a 100MHz-bandwidth. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. This digital multiplexer has 2 outputs.
TS5A3160DBVTE4 Features
1 Channels
10nA Supply Current
Bandwidth: 100MHz
TS5A3160DBVTE4 Applications
There are a lot of Texas Instruments TS5A3160DBVTE4 Analog Switches & Multiplexers ICs applications.
- Data switching
- Voice over IP/DSL – Integrated Access Devices, Smart
- Medical
- DSLAMs
- PCMCIA cards
- Automotive applications
- Audio/video switches
- Transmit
- Cable PC
- Existing multiplexer applications (both fault-protected and nonfault-protected)
