TS5A3160DCKR

6ns, 13ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3160 6 Pins 20nA 1.8V 6-TSSOP, SC-88, SOT-363

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3160DCKR
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: PDF
Stock: 776
Description: 6ns, 13ns SPDT 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3160 6 Pins 20nA 1.8V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	18pF
On-state Resistance Match-Nom	0.15Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	6ns, 13ns
Charge Injection	36.5pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 10MHz
Switching	MAKE-BEFORE-BREAK
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Drain to Source Resistance	1.1Ohm
Ambient Temperature Range High	85°C
On-State Resistance	700mOhm
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Weight	2.494758mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Base Part Number	TS5A3160
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	50nA
Turn On Delay Time	24 ns
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	27 ns

TS5A3160DCKR Overview

As the electronic part is packed in 6-TSSOP, SC-88, SOT-363, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 2:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there are 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 6 series that this electronic component is included. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching with TS5A3160 if you're looking for variants. In this multiplexer, the internal resistance is 1.1Ohm. You can find the functions of the 6 pins in the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. For this digital switch to work, 10nA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 50nA. This switch operates within the bandwidth of 100MHz. This electronic component presents a Drain to Source resistance of 1.1Ohm. In this digital multiplexer, there are 2 outputs.