TS5A3160DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TS5A3160 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 50nA |
| Turn On Delay Time | 24 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 27 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 6ns, 13ns |
| Charge Injection | 36.5pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -64dB @ 10MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3160DCKT Overview
Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. In total, there are 6 terminations. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. There are 6 pins injected into the electronic part body. Circuits based on SPDT switching are used to construct these analog switch ics. TS5A3160 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 900mOhm. You can find the functions of the 6 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 10nA would be sufficient for this switch device. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. If put voltage greater than 50nA on the device, damage may be caused to the analogue multiplexer. Operating the 1 inputs requires 1 inputs. 100MHz bandwidths enable data to be transferred. A analog switch ics with 2 outputs is included.
TS5A3160DCKT Features
1 Channels
Switch Circuit: SPDT
10nA Supply Current
Bandwidth: 100MHz
TS5A3160DCKT Applications
There are a lot of Texas Instruments TS5A3160DCKT Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Private Branch Exchange (PBX)
- DSLAMs
- Communication systems
- Medical Instrumentation
- USB 1.1 signal switching circuits
- Industrial control systems
- Digital cross connects (DSX-1)
- Video signal routing
- Cell phones
