TS5A3166DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A3166 |
| Output | SEPARATE OUTPUT |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 7 ns |
| Input Voltage (Max) | 7V |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 11.5 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 7ns, 11.5ns |
| Charge Injection | 1pC |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3166DBVRG4 Overview
Presented in SC-74A, SOT-753, this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 5. The electronic part delivers high-quality output through its 1 channels. A 1.8V voltage supply should turn on and run the electronic component. There is an electrical component included in the 5 series. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching for the analog switch ic with TS5A3166 if you are looking for variants. It has an internal resistance of 900mOhm. Datasheets for functions of 5 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 5.5V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. The switch device would be able to operate with 10nA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating 1 inputs is required. 200MHz-bandwidths can be used to transfer data between multiplexers.
TS5A3166DBVRG4 Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 200MHz
TS5A3166DBVRG4 Applications
There are a lot of Texas Instruments TS5A3166DBVRG4 Analog Switches & Multiplexers ICs applications.
- Central office
- Precision data acquisition
- DVD-R
- Residential Gateways, Home Gateway/Router
- Switching Systems
- Low-Voltage
- Industrial control systems
- Battery Powered Instruments
- PBXs
- Access Concentrators
