TS5A3167DBVRE4

7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3167 5 Pins 20nA 1.8V SC-74A, SOT-753

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3167DBVRE4
Package: SC-74A, SOT-753
Datasheet: -
Stock: 507
Description: 7.5ns, 11ns SPST - NC 900mOhm DUAL Analog Switches MAKE-BEFORE-BREAK TS5A3167 5 Pins 20nA 1.8V SC-74A, SOT-753(Kg)

Details

Tags

Parameters
Pin Count	5
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	19 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	17.5 ns
-3db Bandwidth	150MHz
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	19pF 18pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	7.5ns, 11ns
Charge Injection	6pC
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Weight	11.198062mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TS5A3167
Output	SEPARATE OUTPUT

TS5A3167DBVRE4 Overview

The electrical component comes in SC-74A, SOT-753 packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. There are 5 terminations totally. This electronic part offers high-quality output due to its 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. As part of the design of the 5 series, this electronic part has been incorporated into the system. These analog multiplexers are built based on SPST - NC switching circuits. Try searching for the analog switch ic with TS5A3167 if you are looking for variants. Internally, this switch multiplexer has a resistance of 900mOhm. Datasheets for 5 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.65V should be applied to the electronic component. An operating current of 10nA would be sufficient for this switch device. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical component supports 1 inputs. In 200MHz-bandwidths, data can be transferred.