TS5A3167DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A3167 |
| Output | SEPARATE OUTPUT |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 7 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 11.5 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 7.5ns, 11ns |
| Charge Injection | 6pC |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3167DBVRG4 Overview
As the electronic part is packed in SC-74A, SOT-753, international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. A total of 5 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 5 series. The analog switch ics are built using SPST - NC switching circuits. Using the TS5A3167 search parameter, you can discover variants of the switch. Analog switches have 900mOhm internal resistance. For functions related to 5 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. A low voltage of 1.65V should be applied to the electronic component. For this digital switch to work, 10nA current would suffice. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 100nA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. There are 1 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths.
TS5A3167DBVRG4 Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 200MHz
TS5A3167DBVRG4 Applications
There are a lot of Texas Instruments TS5A3167DBVRG4 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Channelized and Unchannelized DS3 applications
- Battery-powered systems
- Channel Banks
- Multi-Line E1 Interface Cards
- PCMCIA cards
- Power routing
- Low-Voltage
- Fault Tolerant Systems
- Multiplexers
