Parameters |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Resistance |
900mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Base Part Number |
TS5A3167 |
Output |
SEPARATE OUTPUT |
Pin Count |
5 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
10nA |
Nominal Supply Current |
10nA |
Max Supply Current |
100nA |
Throw Configuration |
SPST |
Turn On Delay Time |
7 ns |
Number of Inputs |
1 |
Supply Type |
Single |
Bandwidth |
200MHz |
Turn-Off Delay Time |
11.5 ns |
-3db Bandwidth |
150MHz |
On-State Resistance (Max) |
900mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
64 dB |
Current - Leakage (IS(off)) (Max) |
20nA |
Channel Capacitance (CS(off), CD(off)) |
19pF 18pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
7.5ns, 11ns |
Charge Injection |
6pC |
Switching |
MAKE-BEFORE-BREAK |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Normal Position |
NC |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
TS5A3167DCKRG4 Overview
The electronic component is convenient to ship overseas because it is packed in a 5-TSSOP, SC-70-5, SOT-353. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 5 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. As part of its design, the 5 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with TS5A3167. Internally, this switch multiplexer has a resistance of 900mOhm. Datasheets for functions of 5 pins are available. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. This multiplexer would work with 10nA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. If you put voltage higher than 100nA on the digital multiplexer, damage may occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The 1 inputs need to be operated in order to work. There are various bandwidths available for data transfer.
TS5A3167DCKRG4 Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 200MHz
TS5A3167DCKRG4 Applications
There are a lot of Texas Instruments TS5A3167DCKRG4 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- T1/E1 Terminals
- Audio and video routing
- Imaging
- Sample hold systems
- USB 1.1 signal switching circuits
- Isolation
- Residential Gateways, Home Gateway/Router
- Cell phones
- Microprocessor Controlled Analog Systems